GLOBAL

DEVImat™ 200T

DEVImat™ 200T is a self-adhesive electric underfloor heating mat designed for indoor floor heating applications, particularly renovation projects where a low build-up height is required.
 
The heating mat features a 360° screened heating cable with FEP-insulated conductors and a red PVDF outer sheath (non-UV-stable). Its round cable profile and low installation height of 3.5 mm support installation beneath tiled and other suitable floor constructions.
 
The self-adhesive mesh helps position the mat during installation, while a single cold lead simplifies connection to the electrical supply.
DEVImat™ 200T must be installed together with a suitable thermostat. Appropriate temperature control helps prevent overheating and supports energy management according to the selected control settings.
 
The cold lead consists of solid conductors that facilitate installation. The visible connection point between the heating cable and cold lead assists correct placement during installation.
 
Each heating cable is tested for parameters including Ohmic resistance, high-voltage performance, and material conformity as part of the manufacturing quality-control process.
 
DEVImat™ 200T is covered by the applicable DEVIwarranty™ terms and conditions.
 
The product has an Environmental Product Declaration (EPD). An EPD provides quantified environmental information about a product based on a life cycle assessment and follows applicable EPD programme requirements.
DEVImat™ 100T

Benefits

  • Fast positioning with self-adhesive mesh
  • Low floor build-up for renovation applications
  • Single cold lead simplifies electrical connection
  • Round cable design supports installation within floor constructions
  • Factory-tested cable construction
  • Suitable for use with thermostat-based temperature control

Specification

Nominal voltage

230 V~

Construction

Twin conductor with 360° screening, one cold lead

Output

200 W/m2 @ 230 V~

Max. permissible use temperature, powered

115 °C

Max. permissible use temperature, unpowered

120 °C

Cable dimensions

3,0 mm

Deformation strength

600 N

Pulling strength

120 N

Conductor insulation

FEP

Outer sheath

PVDF

Screen

100% coverage; alu-foil; 0,5 mm2 tinned copper drain wire

Cold lead

4 m DTWB 2 x 1 mm2 with screen

Min. installation temperature

-5 °C

Bending Ø, min.

5 cm

IP Class

IPX7

Set with flexpipe

Flexpipe, inner ø6,7 mm, outer ø10 mm, 2,5 m, Black

Warranty scope

20 years

Compliance

Standard compliance: 

IEC 60335-1: 2012 (with amendments)

• IEC 60335-2-96: 2002 (with amendments)

Compliance

Product variants

Choose a product variant to go for product page on Danfoss Store, where you can find more details and documents

Types: set DEVImatTM 200T with Flexpipe

  

Item no.

Heated area

Dimensions (W x L)

Output @ 230V~

Resistance

Cold lead

140F1735

0,45 m2

0,5 x 0,9 m

87 W

608 O

2 x 1,0 mm2

83020736

1,05 m2

0,5 x 2,1 m

215 W

246 O

2 x 1,0 mm2

83020737

1,45 m2

0,5 x 2,9 m

285 W

186 O

2 x 1,0 mm2

83020738

2,1 m2

0,5 x 4,2 m

430 W

123 O

2 x 1,0 mm2

83020739

2,5 m2

0,5 x 5,0 m

500 W

106 O

2 x 1,0 mm2

83020740

3,1 m2

0,5 x 6,2 m

605 W

87 O

2 x 1,0 mm2

140F1736

3,45 m2

0,5 x 6,9 m

695 W

76 O

2 x 1,0 mm2

83020742

4,3 m2

0,5 x 8,6 m

845 W

63 O

2 x 1,0 mm2

83020743

4,95 m2

0,5 x 9,9 m

990 W

53 O

2 x 1,0 mm2

83020744

6,1 m2

0,5 x 12,2 m

1210 W

44 O

2 x 1,0 mm2

140F1737

7,0 m2

0,5 x 14,0 m

1385 W

38 O

2 x 1,0 mm2

140F1738

7,8 m2

0,5 x 15,6 m

1565 W

34 O

2 x 1,0 mm2

140F1739

8,8 m2

0,5 x 17,6 m

1715 W

31 O

2 x 1,0 mm2

83020748

10,5 m2

0,5 x 21,0 m

2070 W

26 O

2 x 1,0 mm2

Documents